Skip to content
Home » 2017 Ford Escape Spark Plug Socket Size Guide

2017 Ford Escape Spark Plug Socket Size Guide

    2017 Ford Escape Spark Plug Socket Size

    Overview

    The spark plugs in your 2017 Ford Escape play a crucial role in the ignition process of your engine. Over time, these spark plugs may wear out and need to be replaced. When replacing the spark plugs, it is important to use the correct socket size to ensure a proper fit and avoid damaging the plugs or the socket itself. In this article, we will discuss the spark plug socket size for the 2017 Ford Escape.

    Spark Plug Socket Size Chart

    To make it easier for you to find the correct spark plug socket size for your 2017 Ford Escape, refer to the following chart:

    Engine Spark Plug Socket Size
    2.5L Duratec 5/8″ (16mm)
    1.5L EcoBoost 9/16″ (14mm)
    2.0L EcoBoost 9/16″ (14mm)

    Steps to Replace Spark Plugs

    If you need to replace the spark plugs in your 2017 Ford Escape, follow these steps:

    1. Make sure the engine is cool before starting any work.
    2. Locate the spark plugs. They are typically located on the top of the engine, connected to the ignition coils.
    3. Remove the spark plug wire or ignition coil from the top of the spark plug.
    4. Using the appropriate spark plug socket size, place the socket onto the spark plug.
    5. Attach a ratchet or a spark plug socket wrench to the socket.
    6. Turn the ratchet or wrench counterclockwise to loosen and remove the spark plug.
    7. Inspect the old spark plug for any signs of damage or wear.
    8. If necessary, gap the new spark plug to the manufacturer’s specifications using a spark plug gap tool.
    9. Thread the new spark plug into the engine by hand to avoid cross-threading.
    10. Tighten the spark plug using the spark plug socket and ratchet or wrench. Be careful not to overtighten.
    11. Reattach the spark plug wire or ignition coil to the top of the spark plug.
    12. Repeat these steps for each spark plug that needs to be replaced.

    Conclusion

    Knowing the correct spark plug socket size for your 2017 Ford Escape is essential when replacing the spark plugs. By following the steps outlined in this article and using the appropriate socket size, you can ensure a successful spark plug replacement and maintain the optimal performance of your vehicle’s engine.