Skip to content
Home » 2008 Honda Civic Spark Plug Socket Size Guide

2008 Honda Civic Spark Plug Socket Size Guide

    2008 Honda Civic Spark Plug Socket Size

    Overview

    The spark plugs in your 2008 Honda Civic play a crucial role in the combustion process of your engine. Over time, these spark plugs may wear out and need to be replaced. To properly replace the spark plugs, you will need the correct socket size. In this article, we will discuss the spark plug socket size for a 2008 Honda Civic.

    Spark Plug Socket Size Chart

    To make it easier for you to find the right spark plug socket size for your 2008 Honda Civic, refer to the following chart:

    Engine Type Socket Size
    1.8L 4-cylinder 5/8 inch (16mm)
    2.0L 4-cylinder 5/8 inch (16mm)

    Step-by-Step Guide

    If you need to replace the spark plugs in your 2008 Honda Civic, follow these steps:

    1. Make sure the engine is cool before starting any work.
    2. Locate the spark plug wires or ignition coil packs on top of the engine.
    3. Remove the spark plug wire or ignition coil pack from the first spark plug by gently pulling it straight up.
    4. Using the appropriate spark plug socket size (5/8 inch or 16mm), attach it to a ratchet or extension.
    5. Insert the spark plug socket into the spark plug well and carefully loosen the spark plug by turning it counterclockwise.
    6. Once the spark plug is loose, remove it from the well by lifting it out with the socket.
    7. Inspect the old spark plug for any signs of damage or wear. If necessary, replace it with a new spark plug of the same size and heat range.
    8. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    9. Insert the new spark plug into the spark plug well and hand-tighten it clockwise until it is snug.
    10. Using the spark plug socket and ratchet or extension, tighten the spark plug an additional 1/2 to 2/3 of a turn.
    11. Repeat steps 3-10 for each spark plug, one at a time.
    12. Once all the spark plugs are replaced, reattach the spark plug wires or ignition coil packs.

    Conclusion

    Knowing the correct spark plug socket size for your 2008 Honda Civic is essential when it comes to replacing the spark plugs. By following the steps outlined in this article, you can easily replace the spark plugs and ensure the optimal performance of your vehicle’s engine. Remember to always consult your vehicle’s manual or a trusted mechanic if you have any doubts or concerns.