Skip to content
Home » Toyota Corolla Spark Plug Socket Size Guide

Toyota Corolla Spark Plug Socket Size Guide

    Spark Plug Socket Size for Toyota Corolla

    Overview

    When it comes to maintaining your Toyota Corolla, one important task is changing the spark plugs. To successfully replace the spark plugs, you’ll need the right tools, including a spark plug socket. In this article, we will discuss the spark plug socket size for the Toyota Corolla and provide you with all the information you need to complete this task.

    Spark Plug Socket Size Chart

    To determine the correct spark plug socket size for your Toyota Corolla, refer to the chart below:

    Year Engine Socket Size
    2003-2008 1.8L 16mm
    2009-2013 1.8L 14mm
    2014-2021 1.8L 16mm

    Step-by-Step Guide

    To change the spark plugs in your Toyota Corolla, follow these steps:

    1. Ensure the engine is cool before starting the process.
    2. Locate the spark plug wires or ignition coils on top of the engine.
    3. Remove the spark plug wire or ignition coil from the first spark plug by gently pulling it straight off.
    4. Using the appropriate spark plug socket size from the chart above, attach it to a ratchet or extension.
    5. Place the socket over the spark plug and turn it counterclockwise to loosen and remove the old spark plug.
    6. Inspect the spark plug for any signs of damage or wear. If necessary, replace it with a new one of the same size and type.
    7. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    8. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand.
    9. Tighten the spark plug using the socket and ratchet, turning it clockwise until it is snug.
    10. Reinstall the spark plug wire or ignition coil onto the spark plug.
    11. Repeat the process for each spark plug, one at a time, until all of them have been replaced.

    Conclusion

    Knowing the correct spark plug socket size for your Toyota Corolla is essential for a successful spark plug replacement. By following the steps outlined in this article and referring to the provided chart, you can confidently maintain your vehicle’s spark plugs and ensure optimal performance. Remember to always consult your vehicle’s manual for specific instructions and safety precautions.