Skip to content
Home » Toyota Camry Spark Plug Socket Size Guide

Toyota Camry Spark Plug Socket Size Guide

    Spark Plug Socket Size for Toyota Camry

    Overview

    When it comes to maintaining your Toyota Camry, one of the essential tasks is replacing the spark plugs. To do this, you’ll need the right tools, including a spark plug socket. In this article, we will discuss the spark plug socket size for a Toyota Camry and provide you with the necessary information to get the job done.

    Spark Plug Socket Size Chart

    To determine the correct spark plug socket size for your Toyota Camry, refer to the following chart:

    Year Engine Socket Size
    2002 – 2011 2.4L 4-cylinder 5/8″ (16mm)
    2002 – 2011 3.0L V6 5/8″ (16mm)
    2012 – present 2.5L 4-cylinder 14mm
    2012 – present 3.5L V6 14mm

    Step-by-Step Guide

    If you’re ready to replace the spark plugs in your Toyota Camry, follow these steps:

    1. Make sure the engine is cool before starting any work.
    2. Locate the spark plug wires or ignition coils on top of the engine.
    3. Remove the wire or coil from the first spark plug by gently pulling it straight up.
    4. Using the appropriate spark plug socket size from the chart, attach it to a ratchet or extension.
    5. Place the socket over the spark plug and turn it counterclockwise to loosen and remove the old spark plug.
    6. Inspect the spark plug for any signs of damage or wear. If necessary, replace it with a new one of the same size and type.
    7. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    8. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand.
    9. Tighten the spark plug using the socket and ratchet, turning it clockwise until it is snug.
    10. Reattach the spark plug wire or ignition coil to the spark plug.
    11. Repeat the process for each spark plug, one at a time, until all have been replaced.

    Conclusion

    Knowing the correct spark plug socket size for your Toyota Camry is crucial when it comes to replacing the spark plugs. By following the steps outlined in this article, you can confidently perform this maintenance task and keep your Camry running smoothly. Remember to consult the spark plug socket size chart for the specific year and engine of your Camry to ensure you have the right tool for the job.