Skip to content
Home » Jeep Patriot Spark Plug Socket Size Guide

Jeep Patriot Spark Plug Socket Size Guide

    Jeep Patriot Spark Plug Socket Size

    Overview

    If you own a Jeep Patriot and are planning to change the spark plugs, it’s important to know the correct socket size to use. The spark plug socket size determines the tool you need to remove and install the spark plugs effectively. In this article, we will provide you with the necessary information about the spark plug socket size for the Jeep Patriot.

    Spark Plug Socket Size Chart

    To make it easier for you to find the right socket size, here is a handy chart that lists the spark plug socket size for different Jeep Patriot models:

    Jeep Patriot Model Spark Plug Socket Size
    Jeep Patriot Sport 2.0L (2007-2017) 5/8″ (16mm)
    Jeep Patriot Sport 2.4L (2007-2017) 5/8″ (16mm)
    Jeep Patriot Latitude 2.0L (2007-2017) 5/8″ (16mm)
    Jeep Patriot Latitude 2.4L (2007-2017) 5/8″ (16mm)
    Jeep Patriot Limited 2.0L (2007-2017) 5/8″ (16mm)
    Jeep Patriot Limited 2.4L (2007-2017) 5/8″ (16mm)

    Steps to Change Spark Plugs in Jeep Patriot

    If you’re planning to change the spark plugs in your Jeep Patriot, here are the steps you can follow:

    1. Make sure the engine is cool before starting.
    2. Locate the spark plug wires or ignition coils on top of the engine.
    3. Remove the spark plug wire or ignition coil from the first spark plug by gently pulling it straight out.
    4. Using the appropriate spark plug socket and ratchet, loosen and remove the old spark plug by turning it counterclockwise.
    5. Inspect the spark plug for any signs of damage or wear. If necessary, replace it with a new one of the same type and gap size.
    6. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    7. Insert the new spark plug into the spark plug socket and carefully thread it into the spark plug hole by hand.
    8. Tighten the spark plug using the spark plug socket and ratchet, turning it clockwise until snug.
    9. Reattach the spark plug wire or ignition coil to the spark plug.
    10. Repeat the above steps for each spark plug, one at a time.

    Conclusion

    Knowing the correct spark plug socket size for your Jeep Patriot is essential when it comes to maintaining and replacing spark plugs. By following the steps outlined in this article, you can confidently change the spark plugs in your Jeep Patriot and keep your engine running smoothly. Remember to always consult your vehicle’s manual or a trusted mechanic if you have any doubts or questions.