Infiniti G35 Spark Plug Socket Size
Overview
When it comes to maintaining your Infiniti G35, one important aspect to consider is the spark plugs. These small but crucial components play a vital role in the ignition process of your vehicle. If you’re planning to change the spark plugs on your Infiniti G35, it’s essential to know the correct socket size to ensure a smooth and successful replacement. In this article, we will provide you with the necessary information regarding the spark plug socket size for your Infiniti G35.
Spark Plug Socket Size Chart
To make things easier for you, here is a table that outlines the recommended spark plug socket size for different Infiniti G35 model years:
Model Year | Spark Plug Socket Size |
---|---|
2003-2006 | 5/8 inch (16mm) |
2007-2008 | 9/16 inch (14mm) |
2009-2013 | 5/8 inch (16mm) |
Step-by-Step Guide to Changing Spark Plugs
If you’re ready to replace the spark plugs in your Infiniti G35, follow these steps:
- Make sure your engine is cool before starting any work.
- Locate the spark plug wires or ignition coils on top of the engine.
- Remove the wire or coil from the first spark plug by gently pulling it straight up.
- Using the appropriate spark plug socket and a ratchet or extension, loosen and remove the old spark plug by turning it counterclockwise.
- Inspect the old spark plug for any signs of damage or wear. If necessary, replace it with a new one of the same type and heat range.
- Apply a small amount of anti-seize compound to the threads of the new spark plug.
- Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand to avoid cross-threading.
- Tighten the spark plug using the spark plug socket and ratchet or extension. Be careful not to overtighten.
- Reattach the spark plug wire or ignition coil to the spark plug.
- Repeat the process for each spark plug, one at a time, until all have been replaced.
Final Thoughts
Knowing the correct spark plug socket size for your Infiniti G35 is essential for a successful spark plug replacement. By following the steps outlined in this article, you can confidently maintain your vehicle’s ignition system and ensure optimal performance. Remember to consult your vehicle’s manual or a trusted mechanic if you have any specific questions or concerns. Happy wrenching!