Skip to content
Home » Honda ATV Spark Plug Socket Size Guide

Honda ATV Spark Plug Socket Size Guide

    Honda ATV Spark Plug Socket Size

    Overview

    When it comes to maintaining your Honda ATV, one important task is replacing the spark plug. To do this, you’ll need the right spark plug socket size to ensure a proper fit. In this article, we will provide you with the necessary information to determine the correct socket size for your Honda ATV.

    Determining the Spark Plug Socket Size

    To determine the spark plug socket size for your Honda ATV, you can refer to the owner’s manual or follow these steps:

    1. Locate the spark plug on your Honda ATV. It is usually found on the cylinder head.
    2. Inspect the spark plug and identify the hexagonal part at the top, known as the spark plug’s hex size.
    3. Measure the distance across the flats of the hexagonal part using a ruler or caliper.
    4. Refer to the chart below to find the corresponding socket size for your Honda ATV’s spark plug.

    Spark Plug Socket Size Chart

    Spark Plug Hex Size (mm) Socket Size (mm)
    16 16
    18 18
    20.8 21
    22.2 22
    24.8 25

    Using the Correct Spark Plug Socket Size

    Once you have determined the appropriate socket size for your Honda ATV’s spark plug, follow these steps to replace it:

    1. Ensure the engine is cool before starting any maintenance.
    2. Disconnect the spark plug wire by gently pulling it off the spark plug.
    3. Using the correct spark plug socket, attach it to a ratchet or socket wrench.
    4. Insert the socket onto the spark plug and turn it counterclockwise to loosen and remove the old spark plug.
    5. Inspect the new spark plug to ensure it is in good condition and properly gapped.
    6. Insert the new spark plug into the spark plug socket and carefully thread it into the cylinder head by hand to avoid cross-threading.
    7. Tighten the spark plug using the spark plug socket and ratchet or socket wrench. Be careful not to overtighten.
    8. Reconnect the spark plug wire by pushing it firmly onto the spark plug.

    Conclusion

    Knowing the correct spark plug socket size for your Honda ATV is essential for proper maintenance. By following the steps outlined in this article and referring to the spark plug socket size chart, you can confidently replace the spark plug and keep your Honda ATV running smoothly. Remember to always consult your owner’s manual for specific instructions and guidelines.