CRF250R Spark Plug Socket Size
Overview
The CRF250R is a popular motocross bike known for its power and performance. One important aspect of maintaining this bike is ensuring that the spark plug is in good condition. To remove and replace the spark plug, you will need the right socket size. In this article, we will discuss the spark plug socket size for the CRF250R.
Spark Plug Socket Size Chart
To make it easier for you to find the correct spark plug socket size for your CRF250R, refer to the table below:
| Model Year | Spark Plug Socket Size |
|---|---|
| 2004-2009 | 16mm |
| 2010-2017 | 18mm |
| 2018-present | 16mm |
Steps to Remove and Replace the Spark Plug
If you need to remove or replace the spark plug on your CRF250R, follow these steps:
- Ensure the engine is cool before starting any work.
- Locate the spark plug on the engine. It is usually found on the cylinder head.
- Using the appropriate spark plug socket, carefully loosen the spark plug by turning it counterclockwise.
- Once the spark plug is loose, remove it from the engine by pulling it straight out.
- Inspect the spark plug for any signs of damage or wear. If necessary, replace it with a new one.
- Apply a small amount of anti-seize compound to the threads of the new spark plug.
- Insert the new spark plug into the engine and hand-tighten it clockwise until it is snug.
- Using the spark plug socket, tighten the spark plug to the manufacturer’s recommended torque specification. Be careful not to overtighten.
- Double-check that the spark plug is securely in place.
Conclusion
Knowing the correct spark plug socket size for your CRF250R is essential for proper maintenance and replacement of the spark plug. By following the steps outlined in this article, you can easily remove and replace the spark plug to keep your bike running smoothly. Remember to always consult your bike’s manual for specific instructions and torque specifications.