Skip to content
Home » Choosing the Right Socket for Honda Spark Plugs

Choosing the Right Socket for Honda Spark Plugs

    What Size Socket for Honda Spark Plugs

    Overview

    When it comes to maintaining your Honda vehicle, one important task is changing the spark plugs. To successfully remove and install spark plugs, you’ll need the right socket size. In this article, we will explore the socket size required for Honda spark plugs and provide you with a helpful chart for easy reference.

    Socket Size Chart for Honda Spark Plugs

    Honda Model Socket Size (mm)
    Accord 16
    Civic 16
    CR-V 16
    Fit 16
    HR-V 16
    Odyssey 16
    Pilot 16
    Ridgeline 16

    Steps to Change Spark Plugs in a Honda

    1. Ensure the engine is cool before starting.
    2. Locate the spark plug wires or ignition coil packs.
    3. Remove the wire or coil pack from the spark plug by gently pulling it straight out.
    4. Using the appropriate socket size, fit it onto the spark plug.
    5. Turn the socket counterclockwise to loosen and remove the old spark plug.
    6. Inspect the spark plug for any signs of damage or wear.
    7. If necessary, gap the new spark plug to the manufacturer’s specifications.
    8. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand.
    9. Tighten the spark plug using the socket and turn it clockwise until snug.
    10. Reattach the spark plug wire or coil pack to the spark plug.
    11. Repeat the process for each spark plug in your Honda vehicle.

    Conclusion

    Knowing the correct socket size for Honda spark plugs is essential for a successful spark plug replacement. By referring to the provided chart and following the steps outlined, you can confidently maintain your Honda vehicle’s spark plugs and ensure optimal engine performance. Remember to always consult your vehicle’s manual for specific instructions and torque specifications. Happy wrenching!