Skip to content
Home » 2014 Toyota Corolla LE Spark Plug Socket Size Guide

2014 Toyota Corolla LE Spark Plug Socket Size Guide

    2014 Toyota Corolla LE Spark Plug Socket Size

    Overview

    If you are looking to change the spark plugs in your 2014 Toyota Corolla LE, it is important to know the correct socket size to use. The spark plug socket size refers to the size of the socket that fits over the spark plug, allowing you to remove and install it properly. Using the wrong socket size can damage the spark plug or make it difficult to remove. In this article, we will provide you with the spark plug socket size for the 2014 Toyota Corolla LE.

    Spark Plug Socket Size Chart

    To make it easier for you to find the correct spark plug socket size, here is a chart that lists the socket size for the 2014 Toyota Corolla LE:

    Engine Type Socket Size
    1.8L 4-cylinder 5/8 inch (16mm)

    Steps to Change Spark Plugs

    If you are planning to change the spark plugs in your 2014 Toyota Corolla LE, here are the steps you can follow:

    1. Make sure the engine is cool before starting.
    2. Locate the spark plug wires or ignition coils on top of the engine.
    3. Remove the spark plug wire or ignition coil from the first spark plug by gently pulling it straight out.
    4. Using the correct spark plug socket size (5/8 inch or 16mm), attach it to a ratchet or extension.
    5. Insert the spark plug socket over the spark plug and turn it counterclockwise to loosen and remove the spark plug.
    6. Inspect the old spark plug for any signs of wear or damage. If necessary, replace it with a new one of the same type and gap size.
    7. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    8. Insert the new spark plug into the spark plug socket and carefully thread it into the spark plug hole by hand.
    9. Tighten the spark plug using the spark plug socket and ratchet, turning it clockwise until it is snug.
    10. Reattach the spark plug wire or ignition coil to the spark plug.
    11. Repeat the above steps for each spark plug.

    Conclusion

    Knowing the correct spark plug socket size is essential when changing the spark plugs in your 2014 Toyota Corolla LE. By following the steps outlined in this article and using the appropriate socket size, you can ensure a smooth and successful spark plug replacement. Remember to always consult your vehicle’s manual or a trusted mechanic if you have any doubts or concerns. Happy wrenching!