Skip to content
Home » 2014 Mustang GT Spark Plug Socket Size Guide

2014 Mustang GT Spark Plug Socket Size Guide

    2014 Mustang GT Spark Plug Socket Size

    Overview

    If you own a 2014 Mustang GT and are looking to change the spark plugs, it’s important to know the correct socket size to use. The spark plug socket size refers to the size of the socket that fits over the spark plug, allowing you to remove and install it properly. Using the wrong socket size can lead to damage to the spark plug or the socket itself. In this article, we will provide you with the correct spark plug socket size for the 2014 Mustang GT.

    Spark Plug Socket Size Chart

    To make it easier for you to find the correct spark plug socket size, here is a handy chart:

    Engine Socket Size
    5.0L V8 5/8 inch (16mm)

    Steps to Change Spark Plugs

    If you’re planning to change the spark plugs in your 2014 Mustang GT, here are the steps to follow:

    1. Make sure the engine is cool before starting any work.
    2. Locate the spark plugs. In the 2014 Mustang GT with a 5.0L V8 engine, the spark plugs are located on the top of the engine, underneath the ignition coil covers.
    3. Remove the ignition coil covers by gently pulling them upward. They should come off easily.
    4. Using the correct spark plug socket size (5/8 inch or 16mm), attach it to a ratchet or extension.
    5. Place the socket over the spark plug and turn it counterclockwise to loosen and remove the spark plug.
    6. Once the spark plug is removed, inspect it for any signs of damage or wear. If necessary, replace it with a new spark plug of the same size and specifications.
    7. Apply a small amount of anti-seize compound to the threads of the new spark plug to prevent it from seizing in the future.
    8. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand. Make sure not to cross-thread it.
    9. Tighten the spark plug using the spark plug socket and ratchet. Be careful not to overtighten, as this can damage the spark plug or the engine.
    10. Repeat the process for the remaining spark plugs.
    11. Once all the spark plugs are replaced, reattach the ignition coil covers by pressing them back into place.

    Conclusion

    Knowing the correct spark plug socket size is essential when changing the spark plugs in your 2014 Mustang GT. By following the steps outlined in this article and using the correct socket size (5/8 inch or 16mm), you can ensure a proper installation and maintain the performance of your vehicle. Remember to always exercise caution and consult your vehicle’s manual if you have any doubts or concerns. Happy wrenching!