2013 Mazda 3 Spark Plug Socket Size
Overview
If you own a 2013 Mazda 3 and need to replace the spark plugs, it’s important to know the correct socket size to use. The spark plug socket size refers to the size of the socket that fits over the spark plug, allowing you to remove and install it properly. Using the wrong socket size can damage the spark plug or make it difficult to remove. In this article, we will provide you with the spark plug socket size for the 2013 Mazda 3.
Spark Plug Socket Size Chart
To make it easier for you to find the correct socket size, refer to the following chart:
| Engine Type | Socket Size |
|---|---|
| 2.0L SkyActiv-G | 16mm |
| 2.5L SkyActiv-G | 16mm |
Steps to Replace Spark Plugs
If you’re planning to replace the spark plugs in your 2013 Mazda 3, here are the steps you can follow:
- Make sure the engine is cool before starting.
- Locate the spark plug wires or ignition coils on top of the engine.
- Remove the spark plug wire or ignition coil from the first spark plug by gently pulling it straight up.
- Using the appropriate spark plug socket size (16mm for both engine types), attach it to a ratchet or extension.
- Insert the spark plug socket into the spark plug well and carefully loosen the spark plug by turning it counterclockwise.
- Once the spark plug is loose, continue turning it by hand until you can remove it completely.
- Inspect the old spark plug for any signs of damage or wear. If necessary, replace it with a new one of the same type and gap size.
- Apply a small amount of anti-seize compound to the threads of the new spark plug.
- Insert the new spark plug into the spark plug well and hand-tighten it clockwise until it is snug.
- Using the spark plug socket and ratchet or extension, tighten the spark plug an additional 1/16 to 1/8 of a turn.
- Reattach the spark plug wire or ignition coil to the spark plug.
- Repeat the above steps for each spark plug.
Conclusion
Knowing the correct spark plug socket size for your 2013 Mazda 3 is essential when it comes to replacing the spark plugs. By following the steps outlined in this article and using the appropriate socket size, you can ensure a smooth and successful spark plug replacement process. Remember to always consult your vehicle’s manual or a professional if you have any doubts or concerns.