Skip to content
Home » 2013 Ford Fusion Spark Plug Socket Size Guide

2013 Ford Fusion Spark Plug Socket Size Guide

    2013 Ford Fusion Spark Plug Socket Size

    Overview

    If you own a 2013 Ford Fusion and are planning to change the spark plugs, it’s important to know the correct socket size to use. Using the wrong size socket can lead to damage or improper installation of the spark plugs. In this article, we will provide you with the necessary information to determine the spark plug socket size for your 2013 Ford Fusion.

    Determining the Spark Plug Socket Size

    To determine the spark plug socket size for your 2013 Ford Fusion, you can refer to the owner’s manual or consult a reliable automotive resource. However, we have compiled a handy chart below that lists the spark plug socket size for different engine options in the 2013 Ford Fusion:

    Engine Spark Plug Socket Size
    2.5L Duratec I4 5/8″ (16mm)
    1.6L EcoBoost I4 9/16″ (14mm)
    2.0L EcoBoost I4 9/16″ (14mm)

    Steps to Change Spark Plugs

    If you’re planning to change the spark plugs in your 2013 Ford Fusion, here are the general steps to follow:

    1. Ensure the engine is cool before starting any work.
    2. Locate the spark plug wires or ignition coil packs, depending on your engine.
    3. Remove the wire or coil pack from the spark plug by gently pulling it straight out.
    4. Using the appropriate spark plug socket and a ratchet or extension, loosen and remove the old spark plug by turning it counterclockwise.
    5. Inspect the old spark plug for signs of wear or damage. If necessary, replace it with a new one of the same size and type.
    6. Apply a small amount of anti-seize compound to the threads of the new spark plug to prevent seizing in the future.
    7. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand to avoid cross-threading.
    8. Tighten the spark plug using the socket and ratchet, turning it clockwise until it is snug. Be careful not to overtighten.
    9. Reattach the spark plug wire or coil pack to the spark plug.
    10. Repeat the above steps for each spark plug in your engine.

    Conclusion

    Knowing the correct spark plug socket size for your 2013 Ford Fusion is essential when performing maintenance tasks like spark plug replacement. By following the steps outlined in this article and using the appropriate socket size, you can ensure a successful spark plug change and maintain the optimal performance of your vehicle.