2013 F150 Spark Plug Socket Size
Overview
If you own a 2013 Ford F150 and are planning to change the spark plugs, it’s important to know the correct socket size to use. Using the wrong size socket can lead to damage to the spark plug or the socket itself. In this article, we will provide you with the spark plug socket size for the 2013 F150.
Spark Plug Socket Size Chart
To make it easier for you, here is a table that lists the spark plug socket size for the 2013 F150:
Engine Type | Socket Size |
---|---|
3.5L V6 EcoBoost | 9/16″ (14mm) |
5.0L V8 | 9/16″ (14mm) |
6.2L V8 | 9/16″ (14mm) |
Steps to Change Spark Plugs
If you’re planning to change the spark plugs in your 2013 F150, here are the steps you can follow:
- Make sure the engine is cool before starting.
- Locate the spark plugs. They are usually located on the top of the engine, connected to thick wires.
- Remove the wire connector from the spark plug by gently pulling it off.
- Using the correct spark plug socket size (as mentioned in the chart above), attach it to a ratchet or extension.
- Place the socket over the spark plug and turn it counterclockwise to loosen and remove the old spark plug.
- Once the old spark plug is removed, inspect it for any signs of damage or wear.
- Apply a small amount of anti-seize compound to the threads of the new spark plug.
- Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand.
- Tighten the spark plug using the socket and ratchet, turning it clockwise until it is snug.
- Reattach the wire connector to the spark plug.
- Repeat the process for each spark plug.
Conclusion
Knowing the correct spark plug socket size for your 2013 F150 is essential when it comes to changing the spark plugs. By following the steps outlined above, you can safely and effectively replace the spark plugs in your vehicle. Remember to always use the appropriate socket size to avoid any damage.