Skip to content
Home » 2012 Nissan Rogue Spark Plug Socket Size Guide

2012 Nissan Rogue Spark Plug Socket Size Guide

    2012 Nissan Rogue Spark Plug Socket Size

    Overview

    If you own a 2012 Nissan Rogue and need to replace the spark plugs, it’s important to know the correct socket size to use. Using the wrong size socket can damage the spark plug or make it difficult to remove. In this article, we will provide you with the spark plug socket size for the 2012 Nissan Rogue.

    Spark Plug Socket Size Chart

    To make it easier for you to find the correct spark plug socket size, we have compiled a chart below:

    Engine Type Socket Size
    2.5L 4-cylinder 5/8 inch (16mm)

    Steps to Replace Spark Plugs

    If you’re planning to replace the spark plugs in your 2012 Nissan Rogue, follow these steps:

    1. Ensure the engine is cool before starting any work.
    2. Locate the spark plug wires or ignition coil packs on top of the engine.
    3. Remove the spark plug wire or ignition coil pack from the first spark plug by gently pulling it straight up.
    4. Using the appropriate spark plug socket size (5/8 inch or 16mm), attach it to a ratchet or extension.
    5. Insert the spark plug socket into the spark plug well and carefully loosen the spark plug by turning it counterclockwise.
    6. Once the spark plug is loose, continue turning it by hand until it can be removed completely.
    7. Inspect the old spark plug for any signs of damage or wear. If necessary, replace it with a new one of the same type and gap size.
    8. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    9. Hand-tighten the new spark plug into the spark plug well, and then use the spark plug socket and ratchet to tighten it further. Be careful not to overtighten.
    10. Reattach the spark plug wire or ignition coil pack to the spark plug.
    11. Repeat the above steps for each spark plug, one at a time.

    Conclusion

    Knowing the correct spark plug socket size for your 2012 Nissan Rogue is essential when replacing the spark plugs. By following the steps outlined in this article, you can safely and effectively replace the spark plugs in your vehicle. Remember to always consult your vehicle’s manual or a trusted mechanic if you have any doubts or concerns.