Skip to content
Home » 2012 Kia Soul Spark Plug Socket Size Guide

2012 Kia Soul Spark Plug Socket Size Guide

    2012 Kia Soul Spark Plug Socket Size

    Overview

    If you own a 2012 Kia Soul and are planning to change the spark plugs yourself, it’s important to know the correct socket size to use. Using the wrong size can lead to damage and make the task more difficult. In this article, we will provide you with the spark plug socket size for the 2012 Kia Soul.

    Spark Plug Socket Size Chart

    To make it easier for you to find the right socket size, here is a chart that lists the spark plug socket size for the 2012 Kia Soul:

    Engine Type Socket Size
    1.6L GDI 5/8 inch (16mm)
    2.0L GDI 5/8 inch (16mm)

    Steps to Change Spark Plugs

    If you’re planning to change the spark plugs in your 2012 Kia Soul, here are the steps you can follow:

    1. Make sure the engine is cool before starting.
    2. Locate the spark plug wires or ignition coils on top of the engine.
    3. Remove the spark plug wire or ignition coil by gently pulling it straight up.
    4. Using the appropriate spark plug socket size (as mentioned in the chart above), attach it to a ratchet or extension.
    5. Insert the socket onto the spark plug and turn it counterclockwise to loosen and remove the old spark plug.
    6. Inspect the old spark plug for signs of wear or damage. If necessary, replace it with a new one of the same type and gap size.
    7. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    8. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand.
    9. Tighten the spark plug using the socket and ratchet, turning it clockwise until it is snug.
    10. If you removed a spark plug wire, reattach it firmly onto the spark plug.
    11. Repeat the above steps for each spark plug.

    Conclusion

    Knowing the correct spark plug socket size for your 2012 Kia Soul is essential when performing maintenance tasks like changing spark plugs. By following the steps outlined in this article, you can confidently replace the spark plugs and keep your Kia Soul running smoothly. Remember to always consult your vehicle’s manual for specific instructions and refer to the socket size chart provided to ensure you have the right tools for the job.