Skip to content
Home » 2010 Nissan Rogue Spark Plug Socket Size Guide

2010 Nissan Rogue Spark Plug Socket Size Guide

    2010 Nissan Rogue Spark Plug Socket Size

    Overview

    If you own a 2010 Nissan Rogue and are planning to replace the spark plugs, it’s important to know the correct socket size to use. The spark plug socket size determines the tool you need to remove and install the spark plugs effectively. In this article, we will provide you with the necessary information about the spark plug socket size for a 2010 Nissan Rogue.

    Spark Plug Socket Size Chart

    To make it easier for you to find the right spark plug socket size, we have compiled a chart below:

    Year Make Model Engine Socket Size
    2010 Nissan Rogue 2.5L 4-cylinder 5/8 inch (16mm)

    Steps to Replace Spark Plugs

    If you’re planning to replace the spark plugs in your 2010 Nissan Rogue, follow these steps:

    1. Make sure the engine is cool before starting any work.
    2. Locate the spark plug wires or ignition coil packs, depending on your specific model.
    3. Remove the spark plug wire or ignition coil pack from the first spark plug by gently pulling it straight off.
    4. Using the appropriate spark plug socket size (5/8 inch or 16mm), attach it to a ratchet or extension.
    5. Insert the spark plug socket into the spark plug well and carefully loosen the spark plug by turning it counterclockwise.
    6. Once the spark plug is loose, remove it by hand and inspect it for any signs of wear or damage.
    7. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    8. Hand-tighten the new spark plug into the spark plug well, and then use the spark plug socket and ratchet to tighten it further. Be careful not to overtighten.
    9. Reattach the spark plug wire or ignition coil pack to the spark plug.
    10. Repeat the process for the remaining spark plugs.

    Conclusion

    Knowing the correct spark plug socket size for your 2010 Nissan Rogue is essential when it comes to replacing the spark plugs. By following the steps outlined in this article and using the appropriate socket size (5/8 inch or 16mm), you can easily replace the spark plugs and ensure optimal performance of your vehicle.