Skip to content
Home » 2008 Scion TC Spark Plug Socket Size Guide

2008 Scion TC Spark Plug Socket Size Guide

    2008 Scion TC Spark Plug Socket Size

    Overview

    If you own a 2008 Scion TC and are looking to replace the spark plugs, it’s important to know the correct socket size to use. Using the wrong size socket can lead to damage to the spark plug or the socket itself. In this article, we will provide you with the spark plug socket size for the 2008 Scion TC.

    Spark Plug Socket Size Chart

    To make it easier for you to find the correct spark plug socket size, we have created a chart below:

    Year Model Engine Socket Size
    2008 Scion TC 2.4L 4-cylinder 16mm

    Steps to Replace Spark Plugs

    If you’re planning to replace the spark plugs on your 2008 Scion TC, follow these steps:

    1. Make sure the engine is cool before starting.
    2. Locate the spark plug wires or ignition coils on top of the engine.
    3. Remove the spark plug wire or ignition coil by gently pulling it straight up.
    4. Using the appropriate spark plug socket size (16mm for the 2008 Scion TC), attach it to a ratchet or extension.
    5. Insert the spark plug socket into the spark plug well and carefully loosen the spark plug by turning it counterclockwise.
    6. Once the spark plug is loose, remove it from the well by lifting it out with the socket.
    7. Inspect the spark plug for any signs of damage or wear. If necessary, replace it with a new one.
    8. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    9. Insert the new spark plug into the well and hand-tighten it clockwise until snug.
    10. Use the spark plug socket and ratchet to tighten the spark plug an additional 1/2 to 2/3 of a turn.
    11. Repeat these steps for each spark plug.
    12. Reinstall the spark plug wires or ignition coils by pushing them firmly back into place.

    Conclusion

    Knowing the correct spark plug socket size is essential when replacing spark plugs on your 2008 Scion TC. By following the steps outlined in this article and using the 16mm socket size, you can successfully replace your spark plugs and keep your vehicle running smoothly. Remember to always consult your vehicle’s manual or a trusted mechanic if you have any doubts or questions.