Skip to content
Home » 2003 Ford Expedition Spark Plug Socket Size Guide

2003 Ford Expedition Spark Plug Socket Size Guide

    2003 Ford Expedition Spark Plug Socket Size

    Overview

    If you own a 2003 Ford Expedition and need to change the spark plugs, it’s important to know the correct socket size to use. Using the wrong size socket can lead to damage to the spark plug or the socket itself. In this article, we will provide you with the spark plug socket size for a 2003 Ford Expedition.

    Spark Plug Socket Size Chart

    To make it easier for you, here is a chart that lists the spark plug socket size for a 2003 Ford Expedition:

    Engine Type Socket Size
    4.6L V8 5/8 inch (16mm)
    5.4L V8 9/16 inch (14mm)

    Steps to Change Spark Plugs

    If you’re planning to change the spark plugs on your 2003 Ford Expedition, here are the steps you can follow:

    1. Make sure the engine is cool before you begin.
    2. Locate the spark plugs. In the 4.6L V8 engine, they are located on the top of the engine, while in the 5.4L V8 engine, they are located on the sides.
    3. Remove the spark plug wire by firmly pulling it straight off the spark plug. Be careful not to pull on the wire itself.
    4. Using the appropriate spark plug socket size from the chart above, attach it to a ratchet or extension.
    5. Place the socket over the spark plug and turn it counterclockwise to loosen and remove the spark plug.
    6. Inspect the spark plug for any signs of damage or wear. If necessary, replace it with a new one.
    7. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    8. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand.
    9. Tighten the spark plug using the socket and ratchet, turning it clockwise until it is snug. Avoid overtightening.
    10. Reattach the spark plug wire by pushing it firmly onto the spark plug until you hear a click.
    11. Repeat the above steps for each spark plug.

    Conclusion

    Knowing the correct spark plug socket size for your 2003 Ford Expedition is essential when it comes to changing the spark plugs. By following the steps provided and using the appropriate socket size, you can successfully replace the spark plugs and maintain the performance of your vehicle.