Skip to content
Home » 2001 Mitsubishi Spark Plug Socket Size Guide

2001 Mitsubishi Spark Plug Socket Size Guide

    2001 Mitsubishi Spark Plug Socket Size

    Overview

    If you own a 2001 Mitsubishi vehicle and need to change the spark plugs, it’s important to know the correct socket size to use. The spark plug socket size refers to the diameter of the socket that fits over the spark plug, allowing you to remove and install it properly. Using the wrong socket size can lead to damage to the spark plug or the socket itself. In this article, we will provide you with the spark plug socket size for a 2001 Mitsubishi.

    Spark Plug Socket Size Chart

    To make it easier for you to find the correct spark plug socket size for your 2001 Mitsubishi, we have compiled a chart below:

    Model Engine Spark Plug Socket Size
    Galant 2.4L 5/8 inch (16mm)
    Eclipse 2.4L 5/8 inch (16mm)
    Montero Sport 3.0L 5/8 inch (16mm)
    Diamante 3.5L 5/8 inch (16mm)

    Steps to Change Spark Plugs

    If you’re planning to change the spark plugs in your 2001 Mitsubishi, here are the steps you can follow:

    1. Make sure the engine is cool before starting.
    2. Locate the spark plugs. They are usually attached to the engine cylinder head and connected to spark plug wires.
    3. Remove the spark plug wire from the first spark plug by gently twisting and pulling it off.
    4. Using the appropriate spark plug socket size, attach it to a ratchet or extension.
    5. Place the socket over the spark plug and turn it counterclockwise to loosen and remove the spark plug.
    6. Inspect the spark plug for any signs of damage or wear. If necessary, replace it with a new one of the same size and type.
    7. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    8. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand. Make sure not to cross-thread it.
    9. Tighten the spark plug using the socket and ratchet, turning it clockwise until it is snug.
    10. Reattach the spark plug wire to the spark plug.
    11. Repeat the process for the remaining spark plugs.

    Conclusion

    Knowing the correct spark plug socket size for your 2001 Mitsubishi is essential when performing spark plug replacements. By following the steps outlined in this article, you can safely and effectively change the spark plugs in your vehicle. Remember to always consult your vehicle’s manual or a trusted mechanic if you have any doubts or concerns.