Skip to content
Home » 2001 Ford Focus Spark Plug Socket Size Guide

2001 Ford Focus Spark Plug Socket Size Guide

    2001 Ford Focus Spark Plug Socket Size

    Overview

    If you own a 2001 Ford Focus and need to replace the spark plugs, it’s important to know the correct socket size to use. Using the wrong size socket can damage the spark plug and make the replacement process more difficult. In this article, we will provide you with the spark plug socket size for a 2001 Ford Focus.

    Spark Plug Socket Size Chart

    To make it easier for you to find the correct spark plug socket size, here is a handy chart:

    Engine Type Socket Size
    2.0L SOHC 5/8 inch (16mm)
    2.0L DOHC 9/16 inch (14mm)
    2.0L Zetec 9/16 inch (14mm)

    Steps to Replace Spark Plugs

    If you’re not familiar with replacing spark plugs, here are the steps to guide you through the process:

    1. Make sure the engine is cool before you begin.
    2. Locate the spark plugs. In the 2001 Ford Focus, they are located on top of the engine, underneath the ignition coil pack.
    3. Disconnect the electrical connector from the ignition coil pack by pressing the tab and pulling it off.
    4. Remove the ignition coil pack by unscrewing the bolts or clips that hold it in place.
    5. Using the appropriate spark plug socket size, carefully remove the old spark plug by turning it counterclockwise.
    6. Inspect the spark plug for any signs of damage or wear. If necessary, replace it with a new one of the same size and type.
    7. Apply a small amount of anti-seize compound to the threads of the new spark plug to prevent it from seizing in the future.
    8. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by turning it clockwise. Be careful not to cross-thread it.
    9. Tighten the spark plug using the spark plug socket until it is snug, but be careful not to overtighten it.
    10. Reinstall the ignition coil pack and reconnect the electrical connector.
    11. Repeat the process for each spark plug.

    Conclusion

    Knowing the correct spark plug socket size for your 2001 Ford Focus is essential for a successful spark plug replacement. By following the steps outlined in this article and using the appropriate socket size, you can easily replace the spark plugs and maintain the performance of your vehicle. Remember to always consult your vehicle’s manual or a trusted mechanic if you have any doubts or concerns.