Skip to content
Home » 1998 Toyota Corolla Spark Plug Socket Size Guide

1998 Toyota Corolla Spark Plug Socket Size Guide

    1998 Toyota Corolla Spark Plug Socket Size

    Overview

    If you own a 1998 Toyota Corolla and are planning to change the spark plugs, it’s important to know the correct socket size to use. The spark plug socket size determines the tool you need to remove and install the spark plugs effectively. In this article, we will provide you with the spark plug socket size for a 1998 Toyota Corolla.

    Spark Plug Socket Size Chart

    To make it easier for you, here is a table that lists the spark plug socket size for a 1998 Toyota Corolla:

    Engine Type Socket Size
    1.6L 4-cylinder 16mm
    1.8L 4-cylinder 16mm

    Steps to Change Spark Plugs

    If you’re planning to change the spark plugs in your 1998 Toyota Corolla, here are the steps you can follow:

    1. Make sure the engine is cool before you begin.
    2. Locate the spark plug wires. They are usually connected to the top of the engine and run to each spark plug.
    3. Remove the spark plug wire from the first spark plug by firmly pulling on the boot. Be careful not to pull on the wire itself.
    4. Using the appropriate spark plug socket size, attach it to a ratchet or extension and carefully loosen the spark plug by turning it counterclockwise.
    5. Once the spark plug is loose, remove it by hand and inspect it for any signs of wear or damage.
    6. Take the new spark plug and apply a small amount of anti-seize compound to the threads. This will help prevent the spark plug from seizing in the future.
    7. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand. Make sure not to cross-thread it.
    8. Tighten the spark plug using the spark plug socket and ratchet or extension. Be careful not to overtighten it, as this can damage the threads.
    9. Repeat the process for the remaining spark plugs.
    10. Once all the spark plugs are replaced, reattach the spark plug wires to their respective spark plugs.

    Conclusion

    Knowing the correct spark plug socket size for your 1998 Toyota Corolla is essential when performing spark plug replacements. By following the steps outlined in this article, you can easily change the spark plugs and ensure optimal performance for your vehicle. Remember to always consult your vehicle’s manual or a trusted mechanic if you have any doubts or concerns.